Price: £19.99
Brand: Car-Chem
Product Code: LC170 + LC165
Availability: In Stock

Combo Pack, Pre Wax Cleaner & Hydrocoat. 250ml Each

CarChem Hydro Coat

CarChem Hydro Coat paint sealant is an easy on easy off sealant for those who want nothing but the best protection, durability, shine and beading. CarChem Hydro Coat offers a hydrophobic guard and will help protect your car's paint from bird droppings, acid rain, bugs, road salts and other elements. For extended results CarChem Hydro Coat can be layered with a 8 hours gap between applications or add 25ml of sealant to a 975ml of water to make a very effective spray sealant to use after washing which will keep your CarChem Hydro Coat topped up. CarChem Hydro Coat can be used on the entire vehicle including glass, plastics, alloys, steel and rubbers.

How to use

Apply in a cool shaded area, lightly wet either a cotton make up pad or a microfibre applicator pad with the hydro coat coating and begin wiping it in evenly, using light pressure and overlapping strokes. Once on, leave the hydro coat to dry for a minimum of 5-10 maximum and then buff off the residue using a microfibre towel.

Hydro Coat Spray 1ltr Spray

Add 25ml of Hydro Coat to a 1ltr spray bottle and fill the remaining with 975ml of clean water. Simple wash your car in the normal way, allow to drip dry for a few minutes, spray the mixed solution all over the car, coating the paintwork, glass, plastics, alloys, steel and rubbers then hose off, dry your car in the normal way following the top up application.


ChemCoat Pre Wax Cleaner

CarChem Pre Wax Cleaner is the final stage before waxing for maximum gloss and reflectivity. Rich handpicked polishing oils add a deep, rich, wet look to the paint, suitable for all colours of paint work. For best results this should be followed by CarChem Carnauba Polish Glaze, CarChem PTFE Polish or CarChem Hydro Coat. Alternatively if you are looking for a long term sealant you can apply CarChem Nano Shell for a 3 year protection.

How to Use

Apply 2-3 pea-sized drops of product to an applicator this is all that is required per panel, this should be applied as thinly and evenly as possible to produce a film that should then be buffed off when dry using a microfibre towel. Apply by wiping as evenly as possible, using light pressure and overlapping strokes to the full panel before moving to the next.

Write a review

Note: HTML is not translated!
Bad Good